Dev GuideAPI Reference
Dev GuideAPI ReferenceUser GuideGitHubNuGetDev CommunitySubmit a ticketLog In
GitHubNuGetDev CommunitySubmit a ticket

HTTP API basics

Describes URL structures and parameters used in the HTTP integration API for Optimizely Campaign.

URL structure

A URL for an HTTP API request has the following structure (example):

https://api.campaign.episerver.net/http/form/DHS45MDL2/[email protected] 

or:

https://api.campaign.episerver.net/http/mail/SDGF-GH2-123S/updatefields?john.smith=example&mark.spencer[add]=1 

The components of the URL have the following meaning:

The root address of the HTTP-API for Optimizely Campaign; called via an SSL connection:

https://api.campaign.episerver.net/http/... 

Without SSL encryption, the root address starts with:

http://api.campaign.episerver.net/http/... 

The service selector sets the service to be used. Currently, the form service (form) or mail service (mail) is available.

.../form/... 

The authorization code. The operation is performed only if the authorization code is correct:

.../DHS45MDL2/... 

The operation selector defines the operation to be performed:

.../unsubscribe... 

Parameters needed for the operation. See Parameters.

[email protected]... 

Parameters

System parameters

Almost any operation requires several parameters. Parameters that control an operation are prefixed with a bm (for example, "bmRecipientId=[email protected]").

📘

Note

The HTTP API expects case sensitive parameters. Make sure that you use the parameters in the correct upper and lower case. (For example:bmRecipientId instead of bmrecipientid.)

The following system parameters are accepted for each operation:

ParameterDescription
bmSuccessUrlIf a URL is passed using this parameter, the result (success message) is forwarded to this URL after the operation is successfully performed. The GET parameter, bmResult, is appended to this URL. This parameter contains the success message, such as ok or ok:update.

Note: The bmSuccessUrl parameter takes priority over the bmUrl.
bmFailureUrlIf a URL is passed using this parameter, the result (error message) is forwarded to this URL after the operation fails. The GET parameter bmResult is appended to this URL. This parameter contains the error message, such as duplicate or blacklisted.

Note: The bmFailureUrl parameter takes priority over the bmUrl.
bmUrlIf a URL is passed using this parameter, the result is forwarded to this URL after performing the operation (whether successful or failed). The GET parameter bmResult is appended to this URL. This parameter contains the notification message, such as ok or duplicate.

Note: This parameter can be replaced by bmSuccessUrl or bmFailureUrl to handle success and failure messages separately. bmSuccessUrl and bmFailureUrl take priority over bmUrl if used in the same operation.
bmEncodingThis parameter defines the character set for the transmitted data. By default, it is set to iso-8859-1. If the characters are erroneous, try to set the value to utf-8. The encoding is particularly important if arrays of data are transmitted, for example when using the subscribe and updatefields.
bmVerboseTo receive detailed success and failure messages, set the value of this parameter to true (for example, instead of ok, the message ok: removed is returned). By default, this parameter is set to false.

🚧

Tip

Additional system parameters are described in the respective operation.

Data parameters

Data parameters designate a field of the same name in the recipient list, e.g., firstname=John (the parameter firstname contains the value John). If the field does not exist, the parameter is ignored. Otherwise, what happens to the value of this parameter depends on the particular operation. Typically, the content of the field in the database is overwritten with the given value.

Data parameters can:

  • overwrite existing data (salutation=Mr.)
  • be added to existing data (add)
  • be subtracted from existing data (sub)
  • be prefixed to existing data (pre)
  • be appended to existing data (post)

The desired operation is added to the parameter using square brackets ([]).

Examples

  • firstname=John: Set value of the field firstname to John
  • vote[add]=1: Increase the number of vote by 1
  • language[post]=en: Append the value en to the existing value of the field language (e. g., de) . Then, the new value would be: de-en.

📘

Note

Make sure to transmit only URL-encoded data parameters.

The following symbols are used for URL encoding:

  • A question mark (?) marks the beginning of the part of the URL that contains the data request.
  • An equals sign (=) is inserted between the name of a parameter and its value.
  • An ampersand (&) separates two "parameter=value" elements.

You can find the correct spelling of a recipient list's fields in the recipient list details. To do this, perform these steps:

  1. Log in to Optimizely Campaign.
  2. From the start menu, go to Recipients > Recipient Lists.
  3. Click the respective recipient list.
  4. In the Recipient List Details area, check the spelling of the recipient list fields.

📘

Tip

In an HTTP API request, you can use the display name as well as the internal name of a recipient list field.

Format rules

The following formatting rules apply:

ValueFormatExample
int/longDecimal notation without additional symbols.10000 or 5
float/doubleDecimal notation separated by a period (.).12345.67
date/datetimeThe following date formats are supported:
  1. yyyyMMddHHmmss
  • yyyy-MM-dd'T'HH:mm:ssZ
  • yyyy-MM-dd HH:mm:ss
  • yyyy-MM-dd HH:mm
  • yyyy-MM-dd
  • | 2001-08-21T18:52:05+02:00 (+02:00 means CEST) |

    Return values

    📘

    Note

    Due to updates on the API, the responses will no longer contain the default reason phrase (status description) appended to the HTTP status code, such as HTTP 200 "OK" or HTTP 404 "NOT FOUND". If your API client relies on the reason phrase, and to avoid system failures, please adjust your API response handling to ignore the reason phrase until 2021-12-31. See also HTTP specification RFC 7230 3.1.2.

    Usually, operations return a value that contains a success or error message, such as OK: 32 or duplicate. You can use these return values to display a respective message in your form.

    Many operations also support forwarding. After an operation is performed, the user is forwarded to a URL. The return message is added to that URL as an additional parameter (bmResult). For detailed information, see the operation description.

    🚧

    Tip

    If you use the parameter bmVerbose=true, a detailed message is returned (e.g., OK: already_unsubscribed).